Kamianske
Sliding gates in Kamianske
The leaf slides along the fence without swinging into the yard, letting you drive in without leaving the car.
quoted individually · Measurement is free within Kamianske
Cantilever sliding gates move sideways along the fence without the leaf touching the ground. They suit private driveways where swing leaves would obstruct a car, a slope or snow in front of the entrance.
The main requirement is enough clear fence line. You need roughly the driveway width plus an allowance for the counterweight: a 4 m entrance usually needs about 6 m. We verify this before ordering, together with ground levels and foundation space.
The frame, roller carriages and foundation must carry the leaf without skewing. Automation cannot fix heavy movement or weak posts, so we check the gate mechanics first and then size the motor for the weight and duty cycle.
New gates can be ordered with a motor and remotes from the start. Existing gates can often be automated too, provided they are straight, do not sag and move freely by hand.
The motors are designed for sub-zero temperatures. In winter, snow and ice must be cleared from the leaf's path rather than asking the automation to force its way through a mechanical obstruction.
Why this solution
- No swing leaves taking up space inside the yard
- The leaf runs above ground on a cantilever system
- Remote entry without leaving the car
- The motor is sized for weight and duty cycle
- Sound existing gates can often be automated
- Installation, setup and servicing in Kamianske
models and sizes
Cantilever sliding gates: models and sizes
The cost is quoted individually after the measurement: from the dimensions, chosen model, fabric and control type.
- Gates for a private drivewayThe frame, infill and cantilever system are specified for the driveway width and site conditions
- quoted individually
- Automatic sliding gatesA motor sized with margin for the leaf, remotes and manual release for a power cut
- quoted individually
- Automation for existing gatesWe first check the frame, posts, rollers and free manual movement
- quoted individually
- Additional remotes and controlsControls are configured for the number of users and the daily access scenario
- quoted individually
how it looks
Sliding gate options
Examples with profiled sheet, timber and polycarbonate infill. The frame, material and automation are specified after measuring the driveway and clear fence line.
how we work
From request to installation in five steps
- 01
Request
You call or leave a request. We clarify the site type, approximate opening size and preferred controls.
- 02
Site survey
A specialist measures the opening and surrounding space and checks the base, power supply and installation conditions.
- 03
Specification
We specify the construction, colour, automation and options. Before ordering, you receive the full specification and final price.
- 04
Preparation
The gates and automation are prepared to the agreed dimensions and checked before the installation visit.
- 05
Installation
We install the construction, connect and configure the motor, test safety and demonstrate manual operation.
questions
Frequently asked questions
How much space does a sliding gate need?
You need clear fence line roughly equal to the driveway width plus an allowance for the counterweight. A 4 m entrance needs about 6 m, though the exact length depends on the leaf design.
Can existing sliding gates be automated?
Often yes. We check the frame, posts, rollers and manual movement. If the gate is skewed or hard to move, the mechanical problem must be repaired first.
How is a sliding-gate motor selected?
We consider leaf weight and width, free manual movement and openings per day. The motor is sized with a margin so it does not operate continuously at its limit.
Does the automation work in winter?
Yes, the motors are rated for sub-zero temperatures. Keep the leaf's path clear of snow and ice so the automation does not have to force through a mechanical obstruction.
What if there is not enough room along the fence?
A cantilever gate will not fit. For a driveway, consider swing gates; for a garage opening, use a sectional door that lifts under the ceiling.
see also
Other solutions for garages and driveways
Free measurement
We come out, measure and quote
Our specialist inspects the opening and surrounding space, checks the installation conditions, specifies the construction and automation and gives you the final price. The site survey within Kamianske is free.
Call us, or message on Telegram or Viber
Blinds
Automatic gates and roller shutters